Our University of Georgia Tear Drop Banner Kit includes a 9' x 3' tear drop banner, a 3 piece 13' pole, and the recommended metal indoor or outdoor flag stand. This banner kit has a large height of 10' tall when fully assembled!
The tear drop banner is made of thick, weather resistant, 300D three-layer polyester and the University of Georgia logos are screen printed two-sided
so they are viewable correctly on both sides
. The 3 piece pole is made of flexible fiberglass and will freely spin the banner based on the wind direction when placed in the flag stand. Also, our powder coated silver metal flag stand collapses for easy transport and storage.
For more recommended accessories, see our Tear Drop Banner Accessories
To setup your banner kit, start by connecting the 3 piece pole. Second, slide the pole through the sleeve of the banner starting at the bottom and carefully sliding the pole through the sleeve until the tip reaches the top of the banner sleeve. Thirdly, while keeping the tension on the top of the sleeve, pull the remaining banner material down the pole and attach a tied loop from the banner to the pole fastener at the bottom (grab a friend to make this easier, if needed). Finally, place the assembled pole into your metal banner stand.